Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Johns Creek
Fireplace repair in Johns Creek almost always means working around a homeowners association, a steep roofline, or a shared chimney flue, and usually all three at once. We’re Kindling Chimney Sandy Springs, and we’ve been called out to repair fireplaces in Country Club of the South, Medlock Bridge, and Charleston Bay enough times to know what your HOA will ask about before we even ring the bell. A live person answers when you call (229) 459-1048, and we’ll give you a written price before any work starts, every time.
Why Kindling Chimney Sandy Springs Is Johns Creek’s Preferred Fireplace Repair Company
Kindling Chimney Sandy Springs serves Johns Creek with the same discipline we bring to every home: a written care promise covering price, clean-up, and craftsmanship, so there’s never a question about what the crew will do or what the bill will say. Families in Johns Creek call us because we understand that a fireplace repair here isn’t just about the firebox. It’s about the HOA-visible chimney crown, the shared flue in a stacked townhome, and the chase cover rust staining east-facing brick that one neighbor will notice before the other. We coordinate with management companies where needed, and we’ve sat through enough architectural review committee submissions to know what photos to take and what paperwork to send.
- Written price before any work starts – always included, never optional.
- We coordinate with HOAs on visible crown and cap repairs.
- Background-checked, uniformed technicians follow the C.A.R.E. values on every visit.
- Repairs backed by the 365-Day Done Right Promise.
- Call (229) 459-1048 – a live person answers 24/7.
Styles & brands we work with
Gas Fireplace Installation in Johns Creek
Gas Fireplace Installation in Johns Creek most often happens in one of two situations: a homeowner is converting a wood-burning firebox in a 1990s or 2000s custom home, or a builder is finishing out a new or remodeled space with a direct-vent unit and a chase that has never been flashed correctly. We handle both. A standard gas log set installation in an existing firebox on a home in the Medlock Bridge area typically runs $600 to $1,400. A complete direct-vent gas fireplace installation with new venting, gas line to the firebox, and finish work runs $3,800 to $7,500 depending on access, chase condition, and whether the HOA requires specific termination cap profiles.
HOA-visible vent terminations
In Johns Creek, HOA architectural committees frequently require that vent caps match the roofline profile and not protrude beyond approved dimensions. We file for approval when your covenants require it, and we take before-and-after photos of the work for your management company. Our installs use professional-grade venting from Olympia Chimney and Famco so the termination cap holds up to Georgia humidity without rapid rust-through.
Converting wood-burning to gas
Conversion work on a Johns Creek home usually means pulling a gas line through a crawlspace or slab, sealing the old damper, and running a properly sized stainless liner. If the existing fireplace is a prefabricated wood-burning unit, we do not convert it. We replace it with a listed gas fireplace with correct clearances. That detail matters here, because many Johns Creek chimneys have prefab flues installed with insufficient clearance from framing, and a conversion that ignores the firebox rating creates a hidden hazard.
Gas Fireplace Maintenance in Johns Creek
Gas Fireplace Maintenance in Johns Creek homes usually surfaces in October and November, right before the first cold snap, when a pilot light won’t stay lit or the glass has a fogged film that won’t clean off. Annual gas fireplace service is the cheapest insurance a Johns Creek family can buy for a fireplace that runs from November through March. A standard gas fireplace maintenance visit – cleaning the glass, vacuuming the burner, checking the thermopile and thermocouple, verifying gas pressure, and testing the safety shutoff – runs $180 to $280 in the Johns Creek market. If we find a failing thermocouple or a cracked log that needs replacement, most parts for common brands add $50 to $200.
Pilot light and ignition issues
Most pilot light failures here are not mysterious. Moisture from Johns Creek’s humid subtropical climate gets into the control cavity and corrodes connections, or a spider moves into the pilot tube over the summer. We diagnose the actual cause on-site, show you the part, and tell you the repair price before touching anything. No scare talk, no upsell – just a straight answer with a written number.
Pre-season safety checks
We recommend a gas fireplace service every fall before you burn the first fire. In a house with kids and pets, the detail that matters most is confirming the glass barrier stays within safe touch temperatures and the oxygen depletion sensor shuts the unit down if the room oxygen drops. Our technicians are background-checked and arrive in uniform, and pet-safe products are used where there is a choice.
Trusted Brands We Service in Johns Creek
We service fireplaces, inserts, and chimneys using parts from brands that hold up to Georgia’s climate, including Olympia Chimney, Famco, and Copperfield. When your repair calls for a new liner or a replacement crown, we quote professional-grade materials because patching a chasing cover with caulk and spray paint is how you end up with the same failure next spring. For Johns Creek customers, we stock common replacement parts locally and can turn around most gas fireplace repairs within a week, faster when the HOA has a deadline attached to the approval.
Common Fireplace Repair Problems We See in Johns Creek Homes
Here’s what actually breaks in this part of Fulton County, based on what our techs pull apart on Johns Creek jobs:
- Stacked flue water migration in attached homes. In John’s Creek townhome clusters and attached patio homes, a chimney cap failure on a lower fireplace sends water into the shared wall cavity between units. By the time one owner sees a stain, the neighbor’s drywall is already wicking moisture.
- HOA-visible spalling on south-facing brick. Humid summer storms, then a few hard freeze-thaw cycles in January, crack mortar joints on brick chimneys that face full afternoon sun. The HOA sees a spalling chimney as an exterior appearance violation long before the flue becomes unsafe.
- Rusted chase covers and warped chase panels. On prefab fireplaces, a failed chase cover lets Georgia rain straight into the firebox chase. We see rust staining down chimney exteriors in Country Club of the South and Sugar Mill, and the fix is almost always a replacement chase cover and crown, not a cosmetic repaint.
- Improperly installed prefab flue liners. Many Johns Creek chimneys from the 1990s have prefab metal flues installed with less clearance from wood framing than code requires. The hazard only surfaces when someone opens the chase or an HOA-mandated repaint requires scaffolding, and suddenly the sheathing near the firebox looks scorched.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Johns Creek, GA
We Also Serve Cities Near Johns Creek
Our techs run Johns Creek jobs weekly, and we regularly take calls from Sandy Springs, Woodstock, Tucker, and Lilburn homeowners who found us through a neighbor’s recommendation. If you’re just outside Johns Creek proper in one of those communities, the same written pricing and 365-Day Done Right Promise applies. To see our full Fireplace Repair service area and what else we handle, visit the main service page.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Johns Creek
In most Johns Creek covenant communities, yes, any exterior chimney repair that changes a visible surface – a crown, cap, chase cover, or chase panel – requires architectural review committee approval before work begins. We provide the scope of work, material descriptions, and photos needed for the submission, and we coordinate with your management company on scheduling windows. Call (229) 459-1048 and we’ll tell you what your specific community likely requires.
We inspect both fireboxes and the shared flue from top to bottom, then we tell each owner exactly which portion of the repair belongs to them. In a stacked flue, a lower unit’s failing cap can send water into the upper unit’s wall cavity, so we document everything with camera photos before quoting any work. When both owners need repairs, we provide separate written estimates and one clean job.
Sometimes yes, and sometimes the right answer is replacing both refractory panels at once. Double-sided fireplaces share one firebox, so a crack or panel failure on one side often means the same panel is compromised on the other side. We show you the camera evidence and give you a price for both the minimal repair and the complete fix, then you decide. Call (229) 459-1048 for a free fireplace evaluation in Johns Creek.
Rust stains running down your chimney almost always trace back to a failed chase cover or a rusted chase top. Johns Creek’s high humidity and summer rain cycles accelerate the rust-through, especially on south-facing chases that bake in the sun. In most HOA communities, a visibly rust-stained chimney is an exterior appearance violation. Replacing the chase cover stops the staining, and we can match a buff or neutral color that keeps your architectural committee satisfied.
Yes, in most conversions. A gas fireplace produces different exhaust temperatures and chemistry than wood, and the liner must be sized and rated for that. If your chimney is a prefab metal flue installed with insufficient clearance from combustible framing – something we uncover regularly in Johns Creek homes built in the 1990s – a conversion without a properly listed liner and firebox is not a safe job. We use DuraFlex and Famco liners and show you the fan-camera video before and after, so you see exactly what’s inside your flue.
How HOA Rules Change Fireplace Repair in Johns Creek
In the Country Club of the South community, our techs worked a Gas Fireplace Installation in a 1998 stucco home with two see-through fireplaces. The HOA required pre-approval for any visible chimney crown replacement, so we matched the original buff-colored Gelco crown and coordinated with the management company to schedule work during a weekday window. We replaced a rusted chase cover and a warped damper, brought the firebox clearances up to code, and submitted our post-repair photos to the HOA the same day.
That’s the Johns Creek pattern. Large custom homes from the 1990s and 2000s have multiple fireplaces, some see-through, some double-sided, many with shared or stacked flues running through steep pitches and complex rooflines. A chimney crown replacement that’s visible from the street in one community triggers an architectural review. A stacked flue repair in an attached home affects a neighbor’s wall cavity. In Johns Creek, we treat every visible chimney component as a coordination task, not just a repair, because your HOA will treat it that way too.
Our written price before work starts is the same on an HOA-coordinated crown replacement as on a gas log service. Shoe covers and drop cloths go down before any equipment comes through the door. Nothing is moved without asking. A photo of the clean-up is taken before the crew leaves. That’s the Cedarwell Care Promise, on every job, for every Johns Creek family.
Written by Danny Cortes, Owner at Kindling Chimney Sandy Springs, serving Johns Creek families with fireplace repair, gas fireplace installation, and chimney safety inspections.