Chimney Liner & Rebuild Cost - Inspected on Camera, Then Priced in Writing

Sweep & inspection

Caps & crowns

Flue relining

Masonry repair

Gas fireplace service

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Explore

Styles & brands we work with

01Sweep & inspection02Caps & crowns03Flue relining04Masonry repair05Gas fireplace service

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Chimney Liner & Rebuild Cost in Sandy Springs?

Chimney liner and rebuild work in Sandy Springs, GA typically costs between $3,200 and $8,500, with most homeowners paying around $5,400 for a complete stainless steel liner installation paired with moderate masonry rebuild work. A straightforward liner replacement without extensive brick repair starts around $2,800, while a full chimney rebuild from the roofline up can run $9,000 to $18,000 depending on height, access, and brick matching requirements. These are real numbers we quote weekly in Sandy Springs, and you’ll get a written price before any work begins.

If you’re researching this because your chimney has visible cracks, spalling brick, or a liner that’s been flagged during an inspection, you’re in the right place. We’ll walk through exactly what drives these costs in Sandy Springs, what the work involves, and how to know whether you need a repair or a full rebuild. And if you’d rather just talk to someone, call us at (229) 459-1048; a live person answers, not a voicemail tree.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s what we’re seeing across Sandy Springs in 2026, from Riverside Drive to Dunwoody Panhandle. These ranges reflect actual quotes we’ve written in this market, not national averages.

That’s the honest spread. Most jobs we quote in Sandy Springs fall between $3,200 and $8,500 because they bundle a liner with at least some masonry work. A chimney that needs a liner almost always needs something else too: a crown that’s been letting water in, a few courses of brick that have spalled, or flashing that’s pulled away from the roofline.

What drives cost up in Sandy Springs specifically

Sandy Springs has a few quirks that affect chimney pricing. Homes along Riverside Drive and in older neighborhoods like High Point tend to have taller chimneys with steeper roof pitches, which means more scaffolding time and more safety equipment. Chimneys on mid-century ranches in North Springs are shorter and easier to access, so labor runs lower. And the clay-heavy Georgia soil means chimneys shift over decades, so we often find hairline cracks that need repointing before a liner goes in. None of this is a surprise to us; we see it every week.

What Affects Chimney Liner & Rebuild Pricing in Sandy Springs

• Chimney height and roof pitch. A 25-foot chimney on a 10/12 pitch roof requires scaffolding and fall-protection gear. A one-story chimney on a gentle slope is quicker and cheaper. Sandy Springs has both, often on the same street.
• Flue size and shape. Most Sandy Springs fireplaces take a standard rectangular flue liner, but older homes sometimes have odd-sized or offset flues that need custom fabrication. Custom means more labor hours and more material cost.
• Liner type: stainless steel vs. HeatShield. Stainless is the workhorse. HeatShield cerfractory resurfacing is an option when the clay tile liner is cracked but the chimney structure is still sound, and it runs mid-range in cost. We’ll tell you which one actually makes sense for your chimney, not which one makes us more money.
• Brick matching. Sandy Springs has a lot of 1960s and 1970s brickwork in colors that aren’t made anymore. If you need a partial rebuild, we source reclaimed brick to match, which costs more than new brick but looks like the fireplace was never touched.
• Permits and local code. Sandy Springs requires a permit for chimney rebuilds over a certain height, and the city inspects the work. That’s a line item on any rebuild quote. We handle the permit paperwork so you don’t have to think about it.
• Access to the work area. If the chimney is surrounded by mature trees, power lines, or a landscape you don’t want disturbed, we plan around it. That planning time is built into the written price you’ll see before we start.

How to Save on Chimney Liner & Rebuild

Chimney work isn’t where you want to hunt for the lowest bid, but there are ways to keep the total reasonable without compromising the outcome.

• Bundle the liner with other chimney work. If your chimney needs a crown replacement and a liner, doing them together saves on scaffolding and mobilization. We price the bundle honestly; you’ll see the line items on the written quote.
• Act before winter. Chimney companies in Sandy Springs book up fast from October through January. Spring and summer scheduling is more flexible, and that sometimes means a better price on labor.
• Ask about the HeatShield option. If your clay tiles are cracked but the chimney isn’t deteriorating structurally, HeatShield cerfractory resurfacing can restore the flue without the cost of a full stainless liner. It’s not always the right choice, but when it is, it saves real money.
• Fix the crown before it becomes a rebuild. A crown that’s cracked and letting water into the brick will eventually turn a $900 repair into a $9,000 rebuild. Water is the enemy, and a poured concrete crown with a proper drip edge stops it at the source.
• Get a written price before the work starts. This is standard with us; every job gets a written quote before anything begins. You’ll never get a surprise bill from Kindling. Call (229) 459-1048 and we’ll schedule a free estimate, walk the chimney with you, and explain exactly what’s needed and what it costs.

Do You Need a Liner, a Rebuild, or Both?

This is the question we answer more than any other in Sandy Springs, and the answer depends on what we find during the inspection. A chimney liner is the inner sleeve that carries smoke and exhaust up and out. A rebuild addresses the outer structure: the brick, mortar, crown, and flashing that protect your home from weather.

You need a liner when the existing clay tiles are cracked, missing, or eroded, or when the flue is too large for the appliance venting into it. Cracked clay tiles let heat and carbon monoxide reach the chimney structure, which is dangerous and against code. You need a rebuild (or partial rebuild) when the brick is spalling, the mortar joints are failing, the crown is deteriorating, or the chimney is leaning. In Sandy Springs, we often see both problems at once, because water intrusion from a failed crown is what damages the liner in the first place.

When we quote both, we explain why. The written estimate breaks out each line item so you can see exactly what’s structural, what’s code-required, and what can be deferred if you’re on a budget. We don’t pressure you into work you don’t need, and we don’t omit work you do.

What the Chimney Liner & Rebuild Process Looks Like

If you’ve never had chimney work done, here’s the sequence. It’s the same whether you’re in Dunwoody Panhandle or near the Chattahoochee River.

1. Inspection and written estimate

We come out, set up ladders or scaffolding as needed, and do a full inspection. You’ll get a written price before any work starts. Every time. That’s not a promotion; it’s how we operate.

2. Prep and protection

This matters to us because it matters to you. Before any work begins, our technicians lay down drop cloths and put on shoe covers. We move nothing in your home without asking first. If you have kids or pets, you’ll never see debris tracked through the living room. The C.A.R.E. values we train to mean exactly this: protect the home first, do the work second.

3. Rebuild work (if needed)

We remove damaged brick and mortar, rebuild the chimney to the required height, pour a new crown with proper overhang, and install new flashing. Every rebuild we do in Sandy Springs is built to last with mortar that matches your existing color and brick that blends with the original.

4. Liner installation

We install the liner, typically a DuraFlex stainless steel system or an Olympia Chimney liner, sized to your appliance. The liner gets insulated where the manufacturer specifies. Then we install the top plate, rain cap, and any dampers you’ve chosen.

5. Clean-up and photo

Before the crew leaves, we clean the work area and take a photo of the clean-up, which we share with you. It’s part of the Cedarwell Care Promise, and it’s why Sandy Springs families with kids and pets tell us the house looks as good as it did when we arrived.

Every job is covered by our 365-Day Done Right Promise. If something isn’t right, we make it right. No fine print, no runaround. That promise applies to chimney sweeps, inspections, and every repair or rebuild we do.

Liner and Rebuild Materials We Use in Sandy Springs

We don’t use generic parts. Our repairs and liner work use professional-grade materials from brands chimney professionals trust: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These brands have proven themselves over decades in the field. Here’s where each one typically shows up in Sandy Springs jobs:

• DuraFlex: Flexible stainless steel liner systems for most fir