Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Tucker
Fireplace repair in Tucker, GA typically runs $180 – $340 for a gas valve or thermocouple fix, $900 – $2,400 for a stainless flue liner install, and $1,100 – $3,200 for a full firebox rebuild with spalling brick repair. Most repairs we schedule in Tucker are completed within one to two weeks of the first call, and every job starts with a camera inspection you can watch on-screen before anything is recommended. If you’re in the 30084 or 30083 zip code and your gas logs won’t light or your brick face is flaking into the hearth, call (229) 459-1048 and we’ll get a written price in your hand before any work begins.
We know Tucker’s homes better than most repair companies, because we’ve spent years working inside the mid-century brick ranches along Fellowship Road, Lavista Road, and Hugh Howell Road. Those houses were built well, but their fireplaces were built for occasional wood fires, not for the gas logs and inserts families use now. The problems we see aren’t mysterious. They’re predictable. And you deserve to see the evidence before you pay for a fix.
Why Kindling Chimney Sandy Springs Is Tucker’s Preferred Fireplace Repair Company
Tucker homeowners call us because we don’t recommend a repair until you’ve seen the camera footage yourself. That’s not a slogan. It’s how every single job starts. We run a Level 2 camera inspection up the flue, show you what we see, and explain what actually needs to happen now versus what can safely wait a year or two. When a Tucker family hears from another company that they need a full rebuild, we’re often the second call. More than a few of those rebuilds turn out to be a cracked liner fix or a damper replacement.
Danny Cortes leads our repair work, and he’s the one who sets the standard for how our crews treat your house. Shoe covers and drop cloths go down before any tools come through the door. Nothing gets moved without asking. A written price is delivered before any work starts, every single time. And when the job is done, you get a photo of the clean-up before the crew leaves. Families with kids and pets notice the difference, and they tell their neighbors on Nextdoor and in the Tucker community groups.
We’re part of the Cedarwell family of companies, founded in 2003, and scheduling for Tucker is coordinated through our Atlanta office. The crews that show up at your door are background-checked and uniformed, and they know the difference between a 1962 ranch on Wedgewood Drive and a newer build off Idlewood Road. That local knowledge matters when you’re diagnosing a cracked clay tile or a spalling firebox.
Styles & brands we work with
Gas Fireplace Service in Tucker
Gas Fireplace Service in Tucker covers everything from a pilot light that won’t stay lit to a full burner assembly replacement on a vented log set. Most Tucker homes with gas fireplaces have either a converted wood-burning firebox or a direct-vent insert, and both have their own failure patterns. A typical gas fireplace service call in Tucker runs $120 – $260 for diagnosis, cleaning, and minor part replacement. If the thermocouple or thermopile is shot, add $40 – $90 for the part. If the gas valve itself has failed, the full repair usually lands between $280 and $520, and we’ll always quote that in writing before ordering anything.
Pilot Light and Burner Repairs
When the pilot won’t hold a flame on a gas log set in Tucker, it’s usually a thermocouple that’s been cooked by years of short cycles and Georgia humidity. We test the millivolt output first, clean the pilot orifice, and replace the thermocouple if it’s weak. On older sets where the burner ports are clogged with dust and pet hair, we pull the logs, brush the burner, and check the gas pressure at the valve. You’re not paying for guesswork on this; you’re paying for someone who can read the voltage drop and the flame pattern.
Gas Log Set Safety and Performance
Families in Tucker often ask whether their gas logs are safe to run after years of sitting unused. The answer lives in the flue. If those logs are vented into an original 1960s clay tile flue that’s cracked, carbon monoxide isn’t going up the chimney the way it should. We run a camera inspection and a draft test before we tell you the logs are fine. When they’re not, a stainless liner from DuraFlex usually solves the problem without touching the masonry.
Fireplace Insert Installation in Tucker
Fireplace Insert Installation in Tucker is one of the most common larger jobs we do, especially in 1950s and 60s brick ranches where the original firebox is too shallow for a modern wood stove or high-efficiency gas insert. Homeowners want heat, not ambience, and the original masonry fireplaces in Tucker were never designed to push BTUs into the room. A gas insert installation in Tucker typically runs $2,800 – $5,900 including the liner, and a wood-burning insert usually lands between $3,200 and $6,500. The spread depends on whether the existing flue can host the liner or whether we need to break out and replace a section of clay tile first.
Why Inserts Need a Properly Sized Liner
An insert is only as good as the liner behind it. In Tucker, where so many chimneys still have original terra cotta flue tiles cracked under decades of freeze-thaw cycling, a new insert piped into a damaged flue is a carbon monoxide risk wrapped in a pretty package. We size the liner to the appliance and the flue, not the other way around, and we use stainless liners from DuraFlex or Copperfield so the job is done once and done right.
Measuring for the Shallow Firebox Problem
Many mid-century fireplaces in Tucker were built with shallow fireboxes, which means a modern insert simply won’t fit without masonry modification. We measure the firebox depth, rear width, and lintel height before recommending any insert. If the box is too shallow, we can often fabricate an extension or choose a slimmer insert profile that meets code without a full rebuild. You’ll see those numbers before you sign anything.
Trusted Brands We Service in Tucker
We stock parts and service components from the brands that show up most often in Tucker’s fireplaces: Famco dampers and caps, Copperfield chimney products, and DuraFlex stainless liners. When a damper plate has rusted through on a 1971 split-level and you can hear birds in the flue on a quiet morning, our crews can pull the correct Famco replacement from the truck that same day in most cases. For liner work, we carry DuraFlex in the common Tucker sizes, which cuts a week or more off the wait time compared with a shop that has to special-order every single length. We service what’s already there or install what’s right for the house. We just don’t believe in patching a 60-year-old clay tile with a thin coat of sealant and calling it fixed.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Tucker Homes
- Cracked terra cotta flue liners. Tucker’s freeze-thaw cycles put stress on original clay tiles in a way you don’t see as much in newer DeKalb construction. The cracks are invisible from the hearth, and without a camera inspection, they stay invisible until a draft test fails or a home inspector catches them.
- Spalling firebox brick from shallow 1955-1975 fireboxes. Logs sit too close to the face in these older boxes, overheating the front hearth. The brick face flakes away, and that cosmetic damage is often misdiagnosed as a structural problem requiring a full rebuild.
- Third-degree creosote glaze in rarely used fireplaces. Humidity from Georgia red clay keeps flue walls damp, and when a fire is burned occasionally, the smoke condenses into a hard, shiny glaze rather than a brushable soot. It’s stubborn to remove and it burns hot if it ignites.
- Water intrusion through failed crowns and flashing. Spring rains in Tucker expose every weak point in a chimney crown. Water runs into the mortar joints, behind the flashing, and eventually into the roof decking. By the time a ceiling stain shows up inside, the repair scope has spread well past the fireplace.
Pricing for Fireplace Repair in Tucker, GA
We give honest numbers because Tucker families deserve to know the spread before a crew arrives. A gas fireplace diagnostic and repair usually runs $120 – $520, a damper replacement $280 – $700, spalling brick repair on a firebox $450 – $1,400, a stainless flue liner install $900 – $2,400, and a full firebox rebuild with new firebrick $1,100 – $3,200. What moves the number is what the camera sees: a cracked liner versus a collapsed liner, one spalling brick versus a whole hearth face, a simple damper swap versus a rusted smoke shelf. Every job starts with a free written estimate, and you’re under no obligation. The price we hand you is the price you pay, not a starting point for negotiation.
We Also Serve Cities Near Tucker
Our crews also cover Fireplace Repair needs for homeowners just outside Tucker, including Lilburn, Roswell, and Woodstock. If you’re in one of those communities and your chimney hasn’t been looked at in years, the same camera-first process applies and the same written price promise holds. Scheduling is coordinated through our Atlanta office, and routes are planned to keep travel time reasonable for everyone.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Tucker
Tucker’s freeze-thaw cycles crack original terra cotta flue liners because the tiles absorb moisture from Georgia’s humid air and from rain that seeps past a worn crown, then the water expands when temperatures drop. A fireplace that’s barely used still has a flue, and that flue still goes through the same temperature swings every winter. The cracks are real even if nobody’s burned a fire in ten years. A camera inspection is the only way to see them, and that’s where every repair quote from us starts. Call (229) 459-1048 if you suspect your liner’s seen better decades.
Yes, most the time you can. Spalling brick on the firebox face is often a localized problem caused by heat exposure from a shallow mid-century firebox, not by a structural failure in the chimney. We replace the damaged firebrick, re-point the mortar joints, and apply a refractory mortar rated for firebox temperatures, and the chimney itself stays untouched. The only way to know for sure is a camera look at the firebox and the flue together, which we’ll do before recommending any work.
A Level 2 camera inspection is the threshold for any repair quote on a Tucker fireplace. That’s the one where you can see the flue walls, the smoke chamber, the damper seat, and the crown condition on-screen. Without that footage, any price is a guess, and a guess is how families end up paying for a rebuild when a liner replacement would have done the job. We include the camera inspection in our visits when repair work is being considered.
If you don’t have one, you should, and we can install one for $180 – $420 depending on the flue size. A missing cap lets rain into a clay tile flue, which accelerates the freeze-thaw cracking that’s already common in Tucker. It also lets squirrels, birds, and raccoons nest in the smoke chamber, and the nesting material becomes a fire hazard and a draft blocker. A cap is the cheapest fireplace repair you’ll ever pay for, and it prevents several of the expensive ones.
Third-degree creosote is a hard, shiny glaze that forms when smoke condenses on cool, damp flue walls. In Tucker’s humid climate, flues stay damp for more of the year than they would in a drier climate, and when you burn a fire only a few times a season, the temperatures never get high enough to bake the creosote into a brushable form. Instead, it builds up as a concentrated glaze inside the smoke chamber and on the flue walls. It’s the most dangerous form of creosote, and removing it usually requires a chemical treatment plus rotary brushing rather than a standard sweep. If you’re in Tucker and you can’t remember the last time your chimney was actually cleaned, call (229) 459-1048 and we’ll take a look before your next fire.
Call (229) 459-1048 for a free written estimate on any fireplace repair in Tucker. A live person answers, day or night, and we’ll walk through what you’re seeing at the hearth so you know whether it’s worth a service call before we schedule one.
Written by Danny Cortes, Owner at Kindling Chimney Sandy Springs, serving Tucker and the surrounding DeKalb County communities.